|
Downloads - Utilities Download DekTec utilities, such as DtInfo, from this page. These utilities are free and do not require a license from DekTec
|
Download Sections
Installing DekTec Licenses
Running Installers on Windows 7/8/10
Please use "Run as administrator" to run set-up programs (installers) on Windows 7, 8/8.1 and on Windows 10.
This command is available by right-clicking the (extracted) executable Setup.exe file.
Utilities for Windows
|
DtInfo – DekTec hardware information tool Lists information about DekTec devices in your system and allows you to configure I/O ports (e.g. configure as input or as output). DtInfo can also be used to apply DekTec license files (.dtlic) and upgrade the on-board firmware. |
Version 4.29.0 May 2021 |
|
110MB |
|
DtLoop – Input to output looping Loop a transport stream from an input on a DekTec device to an output on another device in another format. |
Version 3.7.0 February 2020 |
|
53MB |
|
DtEnc – Encoder parameter control Set encoding parameters and check encoder status for DekTec hardware A/V encoders (DTA-2180, DTA-2182). Note: v1.4.0 is required for DTA-2180 hardware revision 6.3. |
Version 1.4.0 July 2020 |
|
43MB |
Utilities for Windows and Linux
|
DtPlay – Command-line player software Command-line player software for Windows and Linux |
Version 4.13.0 July 2020 |
|
2MB |
|
DtRecord – Command-line recorder software Command-line recorder software for Windows and Linux |
Version 4.10.0 July 2020 |
|
2MB |
|
DtsdiCvt – DekTec SDI file converter tool Command-line tool for converting .dtsdi files between uncompressed and Huffman encoded |
Version 1.0.0 March 2015 |
|
1MB |
Utilities for Linux
|
DtInfoCL – Command-line hardware information tool Command-line version of the DtInfo utility. Lists DekTec devices in your Linux system. |
Version 1.5.2 June 2020 |
|
9MB |
