DTU-315 – All-Standard 0-2GHz Modulator for USB-3

Portable all-in-one modulator for satellite, terrestrial, and cable.
Bus-powered and compatible with laptops, tablets, and PCs.

I/O: 1x 75-Ω micro-BNC RF out

DTU-331 – All-Standard 0-3GHz RF Probe for USB-3

Pocket-sized receiver for on-the-go cable, terrestrial, and satellite DTV measurements. Also serves as a 60MHz I/Q sampler.
Bus-powered and compatible with laptops, tablets, and PCs.

I/O: 1x 75-Ω micro-BNC RF in

DTU-351 – HD-SDI Input for USB-3

Capture HD-SDI signals directly to your laptop or PC affordably and with no external power supply needed. Transfers complete SDI frames, including 16 audio channels and all HANC and VANC packets.

I/O: 1x 75-Ω BNC HD-SDI input

DTU-236A – 8VSB/QAM and ASI Analysis Probe for USB-2

DekTec's USB-2 hardware-based analyzer for 8VSB and QAM. Equipped with advanced RF measurement options and designed to operate USB powered, this is a very convenient tool for analysis in the field.

I/O: 1x 75-Ω F-type RF in; 1x 75-Ω BNC ASI input

DTU-238 – DVB-T2/T/C, ISDB-T and ASI Probe for USB-2

DekTec's USB-2 hardware-based receiver for DVB-T2, T, C2, C and ISDB-T. With full support for single- and multi-PLP, as well as SISO and MISO, this USB-2 probe is perfectly compliant to DVB-T2 v1.3.1.

I/O: 1x 75-Ω F-type RF in; 1x 75-Ω BNC ASI input

DTU-245 – FantASI ASI/SD-SDI Input and Output for USB-2

DekTec's classic and iconic portable ASI adapter for USB bus. Still a best seller and still an essential tool for every DTV engineer!

I/O: 1x 75-Ω BNC ASI input; 1x 75-Ω BNC ASI output