Satellite Receiver for PCIe
Professional satellite receiver for DVB-S and DVB-S2 with two ASI monitoring outputs. This PCIe card outputs the full stream (not just a single service), either as BBFRAMEs or as a transport stream. Several advanced measurement capabilities are supported.
QPSK, 8-PSK, 16/32-APSK
|RF frequency||950 to 2150MHz (L band)|
|Symbol Rate||2 to 40MBd|
LNB 13V/18V 400mA
|Sensitivity||-60 to -30dBm|
|MER||0 to 22dB|
Inputs and Outputs
|RF in||2x 75-Ω F female|
|ASI out||2x 75-Ω BNC|
|PCI Express||PCIe gen1 x1|
|Processor||Core i5 minimum
Core i7 recommended
Or equivalent AMD CPUs
|OS||Windows 10, 11
Windows Server 16, 19, 22
Linux ≥2.6.18, 3.x, 4.x, 5.x
|Note||The DTA-2137C may be vulnerable to a BIOS issue in certain Intel motherboard chip sets.|
|Satellite receiver for PCIe with StreamXpert Lite and StreamXpress player software.|
|Satellite receiver for PCIe with VF-REC stream recorder and StreamXpert Lite and StreamXpress player software.|
|Satellite receiver for PCIe with StreamXpert analyzer and StreamXpress player software.|
Prices exclude applicable sales tax, shipping charges and customs duties. Quantity discounts may be available, please request a quotation.
Reading DVB-S2 BBFRAMEs
DTA-2107 – Multi-Standard Satellite Modulator for PCIe
The DTA-2107 is a low-profile PCIe card for modulation of DVB-S and DVB-S2 signals. It can be used to test or validate your DTA-2137C application.
DTA-2115B – All-Standard VHF/UHF/L-Band Modulator for PCIe
The DTA-2115B is a high-end modulator with high output level (0dBm) and extremely low phase noise. Use the DTA-2115B to generate any satellite modulated signal.
DTA-2131 – Multi-Standard Cable/Terrestrial Receiver for PCIe
If you are looking for a complementary receiver solution with support for UHF/VHF, the DTA-2131 may be your best choice. The DTA-2131 receives cable and terrestrial signals in the UHF/VHF band.
The DTA-2131 is an SDR-based demodulator, which enables several standards and advanced measurements.